CAMŪ Gauge Rakes
The CAMŪ Gauge Rake is a "goof-proof" exclusive, patented tool designed for the easy application of coating material at pre-set and uniform depths of 1/32", 1/24", 1/16", 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 1", and 1-1/2" depending on the CAMŪ size you select.  This is a "must-have" tool for floor coating applicators and decorative concrete contractors.  It is used for the application of a variety of self-leveling epoxies and higher mil coating products.  It is also a favored tool for the spreading of slurry-like, higher viscosity and cementitious base materials at a precise and uniform depth prior to stamping or the decorative treatment of concrete or other surfaces.  In sum, it is a tool for multiple application needs.

The CAMŪ Gauge Rake is comprised of an aluminum frame that comes with either a threaded handle adapter or a powder-coated aluminum handle.  The CAMŪ sets of 2 CAMŪs are SOLD SEPARATELY.  Each CAMŪ in sizes 1-16 has three contact points machined to the same depth, sizes A&B have six contact points set at the same depth and the "Small Combo CAMŪ" comes with five different contact points set at 1/16", 1/8", 3/16", 1/4" and 5/16".  The advantage of the single size CAMŪ is that it does not have to be replaced as often on the work site.  When one contact point wears down below specification, you simply loosen the wing nut and rotate the CAMŪ to a fresh contact point.  We use a "radial" edge CAMŪ design which maintains uniform coating thickness, even at varying handle angles and lengths.

Cam Gears Sold Separately